|
Table of Contents
-
About this Book
- 1. Overview
-
- 1.1. Setting up the software
- 1.2. Devices and Projects
- 1.3. Configuration
Data
- 1.4. Example for the Configuration Process
- 2. The Program Menus
-
- 2.1. File
Menu
-
-
New Project
-
Open Project File
-
Save Project File
-
Save Copy of Project file as
-
Save Project File as
-
Replace Device from
File
-
Extract Device to File
-
Print
-
Export DSP
Frame I/O as CSV
-
Exit
- 2.2. View
Menu
-
-
Maintenance Window
-
Audio
Sources
-
Logic Sources
-
Global Logic Monitor
-
Watches
-
Fitting Report
-
File Info
- 2.3. Transfer Menu
-
-
Connecting the Configuration-PC to a RM4200D
-
Configuration
of IP Addresses
-
Load to Device
-
Load from Device
- 2.4. Options
Menu
-
-
Configuration
- 2.5. Help Menu
-
-
About
- 3. Maintenance Window — Maintaining
the Modules
-
- 3.1. Overview
- 3.2. Monitor and Unknown Type — Modules
without valid Firmware
- 3.3. Connecting the Software
to the Devices
-
-
Connections using Wide Area
Networks
- 3.4. File Menu
-
-
Close
- 3.5. Device
Menu
-
-
Add device... (Setting up
a connection to RM4200D manually)
-
Refresh all devices (Ctrl+F9)
-
Information
(F11)
-
Get
information from all modules (Ctrl+F11)
-
Reset (F12)
-
Save Setup 0
-
Save
Setup 1…6
-
Clear
Parameter Memory
-
Enter
license code
-
Get
serial numbers (F3)
- 3.6. Protocol
Menu
-
-
Enable CAN Protocol (F4)
-
Filter Foreign UDP Blocks
-
Send CAN Block
-
Clear Message Window (F8)
-
Open in Editor (Ctrl+E)
- 3.7. Update Menu
-
-
Device Firmware
-
Updating the Firmware of Systems without Global
Functions
-
Updating the Firmware of Systems with Global
Functions
-
Updating the Firmware of Single
Modules
-
Troubleshooting
- 3.8. Window Menu
-
-
Stay on Top
- 3.9. Contextual Menu (right mouse button)
-
-
Testmode
-
Set
Module ID
- 3.10. Typical Applications of
the Maintenance Window
-
-
Updating the Firmware
-
Saving Mixer Setups
-
Setup of Replacement Modules
-
Reading out and Changing the License Code
-
Checking the Communication on the CAN Bus
- 4. The Project Tree
-
- 4.1. Project features
-
-
Project
Options
-
Device
Links
-
Global
Logics
-
Global
Potentiometers
-
Global Resources
- 4.2. Device
Properties
-
-
Options
-
Network
Configuration
-
Authorisation
-
Operation
Mode
-
DSP Power Bargraphs
- 5. DSP Frame I/O — Configuring
the DSP Frame
-
- 5.1. DSP Frame I/O — Configuring
the Input and Output Modules
- 5.2. MADI Modules – Option on DSP Boards
- 5.3. Redundant MADI
- 5.4. Delay
Submodule RM420-424S
- 5.5. Configuring
GPIO connectors
- 6. Console – Configuring the
Console
-
- 6.1. Configuring the Console Layout
- 6.2. Configuring Module Options
- 6.3. Key Configuration
- 6.4. Authorisation – Restricting
Key Access
- 6.5. Fader Modules and List
of Functions
- 6.6. Control
Modules and List of Functions
- 6.7. Special – Configuring
Displays in Control Modules
- 7. Configuring the Audio System
-
- 7.1. Monitor Functions – Options for Monitoring
-
-
Default Monitor
Bus Source
-
Rotary Monitor
Selector
- 7.2. Mixing
Functions – Configuring Internal Buses
-
-
Program Buses
-
Aux
Buses
-
Talk
-
Label
-
Output Selector Source List
-
Limiter
-
Stereo
- 7.3. Input Pools – Properties
- 7.4. Synchronisation
-
-
Configuration Examples
- 7.5. Potentiometers
-
-
Potentiometers of the Control
Modules
-
Further Notes on Potentiometers
- 7.6. Mute Logics
- 7.7. Selector
Source Lists
- 7.8. Group
Logic - Join Channels in Groups
-
-
VCA Faders - a flexible alternative.
- 7.9. Inserts
- Patching External Audio Devices into Fader Channels
-
-
Fixed Inserts
-
Switchable Inserts
- 7.10. Global
Pool Lines - Using Pool Signals between several Devices
-
-
Overview
-
Creating
Global Pool Lines
-
Global Pool Line as Source for a Fader
Channel
-
Global Pool
Lines as Sources for a Monitor Bus
-
Global
Pool Line as Source for a Rotary Monitor Selector
- 7.11. Fader Channels – Configuring
Signal Sources for Faders
-
-
Defined Channels
-
General
Options
-
Faderstart
-
Output Mute Functions
-
Logic Functions
- 7.12. Channel Assignment – Assigning Fader
Channels and DSP Processing
-
-
Fader Assignment
-
Fader Configuration
-
DSP Fader Channel Example
-
Global Potentiometer
- 7.13. Output Functions
-
-
Edit Output Functions
-
Number of Output Functions
- 7.14. Super
Output Functions
-
-
Edit Super Output Functions
- 7.15. Fixed Processing – Defining Fixed
DSP Functions
-
-
Number of DSP Processings
- 7.16. Output Routing
-
-
Mute
Logic
-
CS
Routing
-
Clear All
- 8. Configuring the Logic System
-
- 8.1. Defining
Logic Functions
-
-
AND Logic
-
OR Logic
-
Interlock
Logic Bus
- 8.2. Level Detection
- 8.3. Logic Delay
- 8.4. Scripts – Controlling Special Functions
with Scripts
-
-
Examples
for Scripts
- 8.5. GPOs - General Purpose Outputs
-
Index
|