A special case is the Delay Submodule RM420-424S, since it does not have any inputs or outputs. If you configure this module, the faders 1 to n can use delay channels automatically. The bigger n is, the shorter will be the available delay time per fader. The following table shows this dependency:
| Number of Channels | Fader (always stereo, also when used as mono) | Delay Time (per fader) |
|---|---|---|
| 2 | 1 | 21,8 s |
| 4 | 1 and 2 | 10,9 s |
| 8 | 1 to 4 | 5,5 s |
| 16 | 1 to 8 | 2,7 s |
| 32 | 1 to 16 | 1,4 s |
| 64 | 1 to 32 | 0,7 s |
“Faders” refer to the actual faders of the Console, counted from left to right – not the Fader Channels. If there are more faders used than delay channels available, the upper faders do not have any delay functions. For activating the delay function, only the appropriate keys need to be configured.
![[Note]](../pics/note.gif) | Note |
|---|---|
At present, the delay can not be used as Fixed Processing. | |