Index
Prev   

Index

A

address, of fader modules, Setting Address Jumpers for Fader Modules
After Fader Aux, Using Aux Busses
Alarm
LED on Master Control Module, Master Control Module Layout
system condition, Logic Sources
Audio Engine, Principle of Operation
audio processing, structure, Structure of Audio Processing
audio source, Audio Sources and Logic Sources, Audio Sources
Audio Sources window, Audio Sources
Aux
controlling settings from the RM2200D software, Full Screen Display
keys on Master Control Module, Master Control Module Layout
LED on fader channel, Fader Module Layout
overview, Using Aux Busses
setting up from mixing desk, Master Control Module Layout
Aux Gain, Using Aux Busses
Aux signal mode, explained, Using Aux Busses

B

back signal, setting up alternative for clean feed, Master Control Module Layout
Basic Setup, Using Setups, Saving and Loading the Basic Setup

C

CAN bus, Key Features, Protocol - Monitoring the CAN-Bus and Sending Commands
CF Out, key on Master Control Module, Master Control Module Layout
channel display, on fader channel, Fader Module Layout
CHANNEL ON, lamp on fader channel, Fader Module Layout
Channel Setup, Using Setups, Saving a Channel Setup
clean feed, Clean Feeds
application example, Using Clean Feed Channels
configuration in RM2200D software, Clean Feed configuration
controlling Gain, Using Clean Feed Channels
LED on fader channel, Fader Module Layout
overview, Using Clean Feed Channels
selecting an alternative back signal, Master Control Module Layout
setting up from mixing desk, Master Control Module Layout
compressor
controlling from mixing desk, Master Control Module Layout
controlling from the RM2200D software, Full Screen Display
Config file, Configuration Data, About Configuration Data
configuration data, Configuration Data, About Configuration Data
Configuration Mode, Key Features
Connection (dialog), Connection - Configuring the Network Identity
Console (dialog), Console - Choosing Modules
Frame I/O (dialog), Frame I/O - Configuring the DSP Frame
Func keys (dialog), Func keys - Configuring Function Keys
Mod. Options (dialog), Mod. Options - Configuring Module Options
Overview, RM2200D Software Configuration Reference
password protection, Overview, Console - Choosing Modules
Protocol (dialog), Protocol - Monitoring the CAN-Bus and Sending Commands
Talkback (dialog), Talkback
Various (dialog), Various - Configuring Level Meters and Clean Feeds
connecting PC and RM2200D, Connecting to the RM2200D and Transferring Data
Connection, configuration dialog, Connection - Configuring the Network Identity
Console, configuration dialog, Console - Choosing Modules
Control Engine, Principle of Operation
Control Knob, Master Control Module Layout
CS Routing, Configuring Digital Audio Outputs
overview, Using CS Routing
Cue key, Fader Module Layout
cueing
cue status as logic source, Logic Sources
cue to monitor and headphones, Master Module Configuration
setting operation mode, Mod. Options - Configuring Module Options

D

Default, key on Master Control Module, Master Control Module Layout
Display Mode, of RM2200D software, Key Features, Using the RM2200D Software in Display Mode
Full Screen Display, Full Screen Display
overview, Using the RM2200D Software in Display Mode
Small Screen Display, Small Screen Display
DSP frame, Principle of Operation
and serial connection, Connecting via the Serial Port
and serial number, Connection - Configuring the Network Identity
and TCP/IP, Connecting via TCP/IP
changing IP address, Changing the IP address of the DSP frame
configuring modules for, Frame I/O - Configuring the DSP Frame
connecting to from PC, Connection - Configuring the Network Identity
introduction, Key Features
rack mounting, RM220-061 DSP Frame 3U/19“
resetting, Frame I/O - Configuring the DSP Frame
dynamics processing
controlling from the RM2200D software, Full Screen Display
key on Master Control Module, Master Control Module Layout
LED on fader channel, Fader Module Layout
setting up, Master Control Module Layout
switching on/off, Reverse Function Select

E

EQ (equaliser)
controlling parameters from the RM2200D software, Full Screen Display
key on Master Control Module, Master Control Module Layout
LED on fader channel, Fader Module Layout
setting up, Master Control Module Layout
switching on/off, Reverse Function Select
Esc, key on Master Control Module, Master Control Module Layout
Ethernet, Connection - Configuring the Network Identity
Ext, monitor key on Master Control Module, Master Control Module Layout

F

F1…F4, keys on Master Control Module, Master Control Module Layout
fader module
configuration, Mod. Options - Configuring Module Options
layout, Fader Module Layout
select number of modules for mixing desk, Console - Choosing Modules
setting module address, Setting Address Jumpers for Fader Modules
fader start
as logic source, Logic Sources
Fct Sel, key on Master Control Module, Master Control Module Layout
filter
controlling from the RM2200D software, Full Screen Display
key on Master Control Module, Master Control Module Layout
switching on/off, Reverse Function Select
firmware, managing, Managing the Firmware
Fixed Fader, Input Pool, Fixed Faders and Selectors
setting up from mixing desk, Master Control Module Layout
Frame I/O, configuration dialog, Frame I/O - Configuring the DSP Frame
Full Screen Display, Full Screen Display
Func keys, configuration dialog, Func keys - Configuring Function Keys

G

Gain
controlling from the RM2200D software, Full Screen Display
for Aux signals, Using Aux Busses
for clean feed signals, Using Clean Feed Channels
key on Master Control Module, Master Control Module Layout
LED on fader channel, Fader Module Layout
GP1…GP4, keys on Master Control Module, Master Control Module Layout
GPIOs, External Connections using GPIOs
application example, Connecting GPIs and GPOs
GPI as logic source, Logic Sources
GPIO module RM220-311, RM220-311 GPIO Module
overview, Connecting GPIs and GPOs
setting pulse length for GPOs, Frame I/O - Configuring the DSP Frame

H

highpass, filter, Master Control Module Layout

I

Input Pool, Input Pool, Fixed Faders and Selectors
input processing, Setting up Input Processing
controlling from the RM2200D software, Full Screen Display
input selection
from the RM2200D software, Full Screen Display
LED on fader channel, Fader Module Layout
overview, Selecting Input Signals
selecting audio signals, Master Control Module Layout
Input, key on Master Control Module, Master Control Module Layout
Intellimix, connecting, Using CS Routing
IP address, changing for DSP frame, Changing the IP address of the DSP frame

K

key features, Overview
key function
Aux 1/2 (Master Control Module), Master Control Module Layout
CF Out (Master Control Module), Master Control Module Layout
configuring function keys, Func keys - Configuring Function Keys
Cue, Fader Module Layout
Default (Master Control Module), Master Control Module Layout
Dyn (Master Control Module), Master Control Module Layout
EQ (Master Control Module), Master Control Module Layout
Esc (Master Control Module), Master Control Module Layout
Ext (Master Control Module), Master Control Module Layout
F1…F4 (Master Control Module), Master Control Module Layout
Fct Sel (Master Control Module), Master Control Module Layout
Filter (Master Control Module), Master Control Module Layout
Gain (Master Control Module), Master Control Module Layout
GP1…GP4 (Master Control Module), Master Control Module Layout
Input (Master Control Module), Master Control Module Layout
Load Ch (Master Control Module), Master Control Module Layout
Load Set (Master Control Module), Master Control Module Layout
OK (Master Control Module), Master Control Module Layout
ON (fader channel), Fader Module Layout
Pan/Bal (Master Control Module), Master Control Module Layout
Pgm1/Pgm2 (Master Control Module), Master Control Module Layout
program bus assignment, Fader Module Layout
Save (Master Control Module), Master Control Module Layout
Select, Fader Module Layout, Master Control Module Layout
Selector (Master Control Module), Master Control Module Layout
Talk1/2 (Master Control Module), Master Control Module Layout
keys, on fader module, Fader Module Layout

L

layout
fader module, Fader Module Layout
Master Control Module, Master Control Module Layout
LC display, Master Control Module Layout
LED
Alarm (Master Control Module), Master Control Module Layout
Aux1/Aux2 (fader channel), Fader Module Layout
CF out (fader channel), Fader Module Layout
Channel On (fader channel), Fader Module Layout
Cue (fader channel), Fader Module Layout
Dyn (fader channel), Fader Module Layout
EQ (fader channel), Fader Module Layout
Gain (fader channel), Fader Module Layout
input (fader channel), Fader Module Layout
ON (fader channel), Fader Module Layout
Pan/Bal (fader channel), Fader Module Layout
Power (Master Control Module), Master Control Module Layout
Program1/Program 2 (fader channel), Fader Module Layout
Select (fader channel), Fader Module Layout
Stand By (Master Control Module), Master Control Module Layout
level meters
configuration, Various - Configuring Level Meters and Clean Feeds
on Master Control Module, Master Control Module Layout
on PC monitor, Using the RM2200D Software in Display Mode
using, Using Level Meters
levels
setting reference levels, Frame I/O - Configuring the DSP Frame
limiter
controlling from mixing desk, Master Control Module Layout
controlling from the RM2200D software, Full Screen Display
setting thresholds for program signals, Frame I/O - Configuring the DSP Frame
Load Ch, key on Master Control Module, Master Control Module Layout
Load Set, key on Master Control Module, Master Control Module Layout
logic source, Audio Sources and Logic Sources, Logic Sources
Alarm condition, Logic Sources
and GPIOs, Connecting GPIs and GPOs
and talkback, Using Talkback Functions, Talkback
cue status, Logic Sources
fader start, Logic Sources
GP1…GP4, Master Control Module Layout
GPI, Logic Sources
keys on Master Control Module, Master Control Module Layout, Logic Sources
lamp sources, General Purpose Keys GP1 … GP4 and Talk 1, Talk 2 keys
On-Air logic, Logic Sources
System conditions, Logic Sources
Talk1/2, Master Control Module Layout
Logic Sources window, Logic Sources
lowpass, filter, Master Control Module Layout

M

Master Control Module
configuration, Master Module Configuration
defining function keys, Func keys - Configuring Function Keys
keys as logic source, Logic Sources
layout, Master Control Module Layout
mixing desk, Key Features, Principle of Operation
Mod. Options, configuration dialog, Mod. Options - Configuring Module Options
module list, Available Modules
monitoring
and talkback, Talkback
configuring keys F1…F4, Func keys - Configuring Function Keys
default monitor source, Master Control Module Layout, Master Module Configuration
dim volume, Master Module Configuration
function keys for source selection and level adjustment, Master Control Module Layout
key for external signal, Master Control Module Layout
key for selector, Master Control Module Layout
keys for Program1 and Program2, Master Control Module Layout
overview, Monitoring Signals
setting up selector module RM220-228, Configuring Monitor Input Properties
using keys F1…F4 to control signals and volumes, Using Monitor 2…5
using Monitor bus 1, Using Monitor 1
using Monitor bus 2…5, Using Monitor 2…5
mono summation, Master Control Module Layout
controlling from the RM2200D, Full Screen Display
Multiple monitors, running the RM2200D software with, Installing the RM2200D Software

N

network, connecting DSP frame to, Connection - Configuring the Network Identity

O

Off Air operation, Mod. Options - Configuring Module Options
overview, Off Air Operation
OK, key on Master Control Module, Master Control Module Layout
ON, lamp and key on fader channel, Fader Module Layout
Overview, Overview
key features, Overview

P

Pan/Bal
controlling from the RM2200D software, Full Screen Display
key on Master Control Module, Master Control Module Layout
LED on fader channel, Fader Module Layout
password protection, of Configuration Mode, Overview, Console - Choosing Modules
Pgm1/Pgm2, monitor keys on Master Control Module, Master Control Module Layout
phantom power, Master Control Module Layout, Full Screen Display, RM220-122 Mic/Headphone/GPIO Module
phase reverse, Master Control Module Layout
controlling from the RM2200D software, Full Screen Display
Power, LED on Master Control Module, Master Control Module Layout
Pre Fader Aux, Using Aux Busses
Pre Fader Switched Aux, Using Aux Busses
Principle of Operation, Principle of Operation
program bus
assignment, Assigning Program Busses
program bus assignment
and Off Air operation, Off Air Operation
from the RM2200D software, Full Screen Display
Protocol, configuration dialog, Protocol - Monitoring the CAN-Bus and Sending Commands
pulse length, setting for GPOs, Frame I/O - Configuring the DSP Frame

R

rack mounting, DSP frame, RM220-061 DSP Frame 3U/19“
resetting the DSP frame, Frame I/O - Configuring the DSP Frame
Reverse Function Select, Reverse Function Select
RM2200D software
command line parameters, Installing the RM2200D Software
Configuration Mode, RM2200D Software Configuration Reference
Display Mode, Using the RM2200D Software in Display Mode, Using the RM2200D Software in Display Mode
installation and system requirements, Installing the RM2200D Software
multiple monitors, Installing the RM2200D Software
Router Panel, connecting, Using CS Routing

S

Save, key on Master Control Module, Master Control Module Layout
Select, key on fader module, Fader Module Layout
selector module, RM2220-228, RM220-228 Analog In Selector Module
Selector Pool, Input Pool, Fixed Faders and Selectors
Selector, monitor key on Master Control Module, Master Control Module Layout
Selectors, for audio signals, Input Pool, Fixed Faders and Selectors
serial connection, Connecting via the Serial Port
Problems with USB-To-Serial-Converters, Connecting via the Serial Port
serial number, of DSP frame, Connection - Configuring the Network Identity
Setups
loading Basic Setup 0, Master Control Module Layout
loading channel setup with key, Master Control Module Layout
loading User setup with key, Master Control Module Layout
managing from the mixing desk, Managing Setups from the Mixing Desk
overview, Using Setups
saving and loading in the RM2200D software, Full Screen Display
saving setup with key, Master Control Module Layout
Small Screen Display, Small Screen Display
Stand By Mode
enabling, Console - Choosing Modules
LED on Master Control Module, Master Control Module Layout
stereo, exchanging channels, Master Control Module Layout
synchronisation, setting, Frame I/O - Configuring the DSP Frame
system clock, setting, Frame I/O - Configuring the DSP Frame
system conditions, available logic sources, Logic Sources

T

Talk1/2, keys on Master Control Module, Master Control Module Layout
talkback
keys for on Master Control Module, Master Control Module Layout
matrix configuration, Talkback
overview, Using Talkback Functions
Talkback, configuration dialog, Talkback
TCP/IP, Connection - Configuring the Network Identity, Connecting via TCP/IP
telephone unit, connecting to the RM2200D, Using Clean Feed Channels

U

USB-To-Serial-Converter, Connecting via the Serial Port
User Setup, Using Setups, Saving a User Setup

V

Various, configuration dialog, Various - Configuring Level Meters and Clean Feeds
Prev Up 
RM220-020D Fader Module (with channel selection display)