| RM220-061 | DSP Frame 3U/19", 10 slots empty | passive DSP backplane, 10 slots for: ![[Note]](../pics/note.gif) | Note |
|---|
Redundant power supply is not possible or upgradeable! |
|
| RM220-950 | DSP & Communication Controller | | Note |
|---|
RM220-950 or RM220-951 necessary for each RM2200D
on slot 10! |
|
| RM220-951 | DSP, MADI & Comm. Controller | MADI 64ch.In/64ch.Out,
SC connector 100baseTX Ethernet on RJ45 RS232 and CAN bus, DSP, 48kHz, 44.1kHz
| Note |
|---|
RM220-950 or RM220-951 necessary for each RM2200D
on slot 10! |
| Note |
|---|
RS232
connector only available on RM220-061B! |
|
| RM220-122 | Mic/Headphone/GPIO, 4 ch. | 4 RJ45 Connectors 4 el. balanced Mic/Line inputs with preamplifier,
level 18dBu max. phantom power 48V indiv. switchable 2 stereo headphone outputs 2 GPI, 4 GPO, 2 analog control in
|
| RM220-111 | Digital In/Out/GPIO, 8 ch. | 4 RJ45 connectors 4 AES3/EBU/SPDIF inputs 4 AES3/EBU/SPDIF outputs 4 async.input sample rate converters 4 general purpose inputs, TTL 4 general purpose outputs, open col.
|
| RM220-222 | Analog Line In/Out/GPIO,
4 ch. | 4 RJ45 connectors 4 line inputs, el. bal., 18dBu max. 4 line outputs, el. bal., 18dBu max. 4 general purpose inputs, TTL 4 general purpose outputs, open col.
|
| RM220-223 | Analog Line In/Out/GPIO,
4 ch. | 4 RJ45 connectors 4 line inputs, el. bal., 24dBu max. 4 line outputs, el. bal., 24dBu max. 4 general purpose inputs, TTL 4 general purpose outputs, open col.
|
| RM220-228 | Input Selector module (4 stereo input lines,
4 stereo monitor input lines) | 2 stereo input
selectors each with A,B,C,D stereo inputs 16 line inputs, el. bal., 18dBu max. 1 monitor selector and 1 fader selector, 4 RJ45
connectors 1 RM220-228 supported by RM220-061
|
| RM220-311 | GPIO Module | 4 RJ45 connectors 4 general purpose inputs, isolated, optocoupler +4..24V/4mA 12 general purpose outputs, isolated, electro-mechanical relays,
maximum current 1A, max. voltage 30V
|
| RM220-010 | Main Module | 32 pushbuttons,
2 volume controls 1 rotary optical encoder LCD display CAN bus Stereo LED PPM 80mm x 399mm, w/o installation frame
|
| RM220-020
| Fader Module | 4 fader channels,
each with 5 push buttons 4 ALPS faders 100mm CAN bus 160mm x 399mm, w/o installation frame
|
| RM220-020D | Fader Module with LED Displays | 4 fader channels,
each with 5 push buttons and one 4-character LED display 4 ALPS faders 100mm CAN bus 160mm x 399mm, w/o installation frame
|
| RM420-XLR-AA RJ45 | XLR Adapter Panel 1U/19" | for 8 RJ45 connections
to 2 analog modules 8 male XLR and 8 female XLR connectors stereo-paired 4 SubD9 GPIO connectors at the rear 8 RJ45 connectors at the rear 8 CAT5 patch cables 1m included
|
| RM420-XLR-AD RJ45 | XLR Adapter Panel 1U/19" | for 8 RJ45 connections
to 1 analog and 1 digital module 8 male XLR and 8 female XLR connectors at the front 4 SubD9 GPIO connectors at the rear 8 RJ45 connectors at the rear 8 CAT5 patch cables 1m included
|
| RM420-XLR-DD RJ45 | XLR Adapter Panel 1U/19" | for 8 RJ45 connections
to 2 digital modules 8 male XLR and 8 female XLR connectors at the front 4 SubD9 GPIO connectors at the rear 8 RJ45 connectors at the rear 8 CAT5 patch cables 1m included
|
| RM420-XLR-AIN RJ45 | XLR Adapter Panel 1U/19" | for 4 RJ45 connections
to 1 analog module RM220-228 16 female XLR connectors at front 4 RJ45 connectors at the rear side 4 CAT5 patch cables 1m included
|
| RM220-Fxxx | Table Installation Frame | Mechanical parts for mounting the control modules.
<xxx> gives the width in mm and can be 160, 240, 320, 400. For
other sizes, table-installation frames need to be assembled. Please
see website www.rm2200d.com, „Installations Drawings“ for
combinations! |