XS3 – Streamlined IP core
The streamlined IP core that makes every studio setup simple to deploy and easy to maintain. XS3 combines essential mixing and routing capabilities with built-in Dante 4×4, USB audio and 8 APC ports for surfaces and I/O — all in a single rack unit. Simplified configuration gets you on air fast, while optional software licenses and AES67/RAVENNA or Dante IPx modules scale the system as your needs grow.
Up to with 20 stereo faders
Built-in Dante 4×4 and 16-channel USB audio
8 APC ports for surfaces and I/O modules
Simplified setup with optional feature upgrades
The basis for every studio setup
Occupying just 1U of rack space, the XS3 is designed to allow fast and easy configuration. An integral setup assistant tool allows a system supervisor to choose between default settings with a choice of assignable-button functions and display layouts.
More advanced settings can be selected using DHD’s Toolbox configuration software which can be activated via an optional license.
20 Faders (Stereo)
52-7500
- 11 summing busses (PGM, AUX, N-1, PFL)
- 6 mix-minus busses
- 1 virtual mixers
Standard configuration
20 Faders (Stereo)
52-7500 + 52-1950
- 16 summing busses (PGM, AUX, N-1, PFL)
- 6 mix-minus busses
- 1 virtual mixers
Toolbox enabled
24 Faders (Stereo)
52-7500 + 52-1950 + 52-8585 + 52-8584
- 48 summing busses (PGM, AUX, N-1, PFL)
- 24 mix-minus busses
- 4 virtual mixers
Gold upgrade
Simplified configuration software and feature upgrades
Systems equipped with a XS3 Core, will be configured with a simplified version of the Toolbox software called ‘SXConfig‘ or ‘DX2Config’. It allows to adjust a default configuration to fine-tune the system to your specific needs, including change of button functions, selection from a range of display layouts and rearranging initial fader layouts.
By adding software licences, you can increase the capabilities of the XS3. For example by adding the Extended Feature Upgrade licence (52-1950) you can design specialised display views with the Toolbox configuration software and define the number of logic functions, peak meters or add channel delay.
Control options for all platforms
DHD provides platform independent, browser-based Web Apps, such as the Assist App to remote control a DHD device. The maintenance and monitoring of the XS3 core is possible with the System App.
Third-party systems, too, can interface with DHD products via Ethernet by using DHD control API, Ember+ or the open DHD External Control Protocol. Or just use GPIOs.
AoIP built-in
Each XS3 core has a built-in Dante 4×4 channel interface for talk-back, monitoring or recording. The AES67 mode can be activated to be used in a larger variety of AoIP environments.
AES67 / RAVENNA
For a maximum of interconnectivity with other AoIP equipment, each XS3 can be equipped with a AES67 RAVENNA IPx module (52-7567). This allows to use up to 128×128 channels directly in the core.
Dante™ for all Signals
With an optional 52-7580 Dante™ IPx module inside your DSP core, you can use up to 64 inputs and 64 outputs of Dante™ network and two Gigabit Ethernet ports for glitch-free redundancy.
Easy cabling
The XS3 Core provides common RJ45 ports for the connection of control modules and I/O boxes. Here, standard CAT cables are used, carrying Audio, Power and Control signals in the same cable – DHD’s APC technology.
Thus, your setup benefits from the advantages of common CAT cabling infrastructure which allows you to place I/O boxes and control modules anywhere you need them.
Fine-tune your broadcast technology
Need a tailor-made solution for your broadcast facility? DHD audio products are highly modular — and the XS3 IP Core is no exception, especially when ordered as one of our bundles:
An SX2 Bundle contains the complete hardware for a 10-fader mixing console with 2 layers. Also included is the 52-1340 Multi-I/O Box, which you can mount next to the XS3, underneath your desk, or in a rack, occupying only 1U. Bundle pricing offers significant savings over individual components.
You can add I/O modules from the full DHD product range to extend your system as needed.
Let’s talk about your project
Whether you are planning a new studio, upgrading existing facilities or moving to IP and virtual workflows, our team and partners are ready to support you.
52/XS3 Core
XS3 I/Os
