XC3 – Versatile IP core
Versatile IP core
20 to 48 stereo faders, upgradeable by software license
Native AES67/RAVENNA and Dante connectivity
APC single-cable connection for surfaces and I/O
Browser-based WebApps for monitoring and control
Made for on-air studios
The XC3 Core is made for all on-air applications in Radio and TV. This includes small DJ-operated studios with 12 faders or even larger control desks in a complex studio environment with up to 48 faders.
Different device types with different feature sets allow a system that is perfectly fitted to your application and budget.
20 Faders (Stereo)
52-7523
- 16 summing busses (PGM, AUX, N-1, PFL)
- 6 mix-minus busses
- 1 virtual mixers
Standard Console
24 Faders (Stereo)
52-7520
- 48 summing busses (PGM, AUX, N-1, PFL)
- 24 mix-minus busses
- 4 virtual mixers
Medium-sized console
48 Faders (Stereo)
52-7520 + DSP Card 52-7530
- 72 summing busses (PGM, AUX, N-1, PFL)
- 48 mix-minus busses
- 4 virtual mixers
Control-room console
Future-proof by optional feature upgrades
By adding software licences, you can for example increase the number of logic functions, peak meters or add channel delay.
An additional DSP card provides more processing power for fader processings, busses or additional loudness meters.
Toolbox – system configuration software
The flexibility of the XC3 Cores is mainly based on the Toolbox configuration software. All your ideas and requirements for certain functions will be defined during a configuration process typically done by DHD or by your system integrator. This configuration is what will make your system work. However, if you need to change it later, just use the Toolbox software again.
AES67 / RAVENNA
For a maximum of interconnectivity with other AoIP equipment, each XC3 can be equipped with a AES67 RAVENNA IPx module (52-7567). This allows to use up to 128×128 channels directly in the core.
Dante™ for all Signals
With an optional 52-7585 Dante™ IPx module inside your DSP core, you can use up to 512 inputs and 512 outputs of Dante™ network and two Gigabit Ethernet ports for glitch-free redundancy.
Control options for all platforms
DHD provides platform independent, browser-based Web Apps, such as Assist App or Views app to remote control a DHD device. The maintenance and monitoring of the XC3 core is possible with the System App.
DHD provides platform independent, browser-based Web Apps, such as Assist App or Views app to remote control a DHD device. The maintenance and monitoring of the XC3 core is possible with the System App.
Easy cabling
The XC3 and XD3 Cores and the XC3 Concentrator provide common RJ45 ports for the connection of control modules and I/O boxes. Here, standard CAT cables are used, carrying Audio, Power and Control signals in the same cable – DHD’s APC technology.
Thus, your setup benefits from the advantages of common CAT cabling infrastructure which allows you to place I/O boxes and control modules anywhere you need them.
Let’s talk about your project
Whether you are planning a new studio, upgrading existing facilities or moving to IP and virtual workflows, our team and partners are ready to support you.
