52-4261AMotor Fader Module, Alps
Discontinued product
Successor:
 | 52-4261B Motor Fader Module, P&G |
- 5 small pushbuttons, 2 colours, 2 large push buttons, 2 colours, film caps
- 32 character LED display
- 100mm motorfader, conductive plastic
- MX console controller interface
- 293mm x 42,5mm
SKU12775
Weight734 g
Power Consumption1,1 W
Minimum Firmware6.1.0 (recommended or higher)
Remarksuses Alps FADER100MOTALPS, conversion to Penny & Giles possible using FADER-PGFM3200A with "red" connector, note that all faders connected to the same controller must use the same fader type, note correct controller dip-switch settings when using Penny & Giles instead of Alps faders
Spare parts
 | FADER-CON-RD red connector fader adapter | Preferred product | |
 | FADER-PGFM3200M P&G motor fader D460773 | Preferred product | |
 | FADER100MOTALPS ALPS motor fader RSA0K11V900U | Longer delivery times possible | |
 | FADERKNOB-15BCM BLACK 15mm for Motorfader | Preferred product | |
 | KFL6MJ90 Cable ALPS Motorfader, red | Longer delivery times possible | |
 | LEDOS096064EXT MX OLED DISPLAY OSRAM | Discontinued product | |
 | MSSENKM2.5X8TXA Senkschr. M2,5×8 ISO 14581 A2 | Preferred product | |
 | MSSENKM3X6TXA Senkschraube M3x6 Torx 8, A2 | Preferred product | |
 | SW95CAP12MM 12mm cap, flat | Discontinued product | |
 | SW95DIF12MMWS 12mm diffuser, WHITE (standard) | Discontinued product | |
 | SW95SODRP12 push button EAO series 95 12mm | Discontinued product | |
 | SWNKK-KP17-CAP cap NKK KP series 17.4mm | Preferred product | |
 | SWNKK-KP17.4 push button NKK KP series 17.4mm | Legacy product, limited availability |