|
Table of Contents
-
About this Manual
- 1. Connecting DSP Frame Modules
-
- 1.1. RM420-061 DSP Frame 3U/19"
- 1.2. RM420-063 DSP Frame 6U/19"
- 1.3. RM420-111 Digital In/Out/GPIO Module,
8 channels
- 1.4. RM420-122 Mic/Headphone/GPIO Module,
4 channels
- 1.5. RM420-123 Mic/Line/GPIO Module,
4 ch. isolated
- 1.6. RM420-222 Analog In/Out/GPIO Module,
4 channels
- 1.7. RM420-311 GPIO Module, 12 Relays, 4 GPI
- 2. Using GPIs (General Purpose Inputs)
-
- 2.1. RM420-111 Digital In/Out/GPIO Module
- 2.2. RM420-122 Mic/Headphone/GPIO Module
- 2.3. RM420-222 Analog In/Out/GPIO Module
- 2.4. RM420-311 GPIO Module, 12 Relays, 4 GPI
- 3. Using GPOs (General Purpose Outputs)
-
- 3.1. RM420-111 Digital In/Out/GPIO Module
- 3.2. RM420-122 Mic/Headphone/GPIO Module
- 3.3. RM420-222 Analog In/Out/GPIO Module
- 3.4. RM420-311 GPIO Module, 12 Relays, 4 GPI
- 4. XLR Adapter Panels
-
- 4.1. RM420-XLR-AA RJ45/XLR Adapter Panel 1U/19"
(analog)
- 4.2. RM420-XLR-DD RJ45/XLR Adapter Panel 1U/19"
(digital)
- 4.3. RM420-XLR-AD RJ45/XLR Adapter Panel 1U/19"
(analog/digital)
- 5. Technical Specifications
-
- 5.1. General Conditions
- 5.2. Pin Assignment for Module Connectors
- 5.3. Electrical Specifications
-
-
GPO (general purpose output)
-
GPI (general purpose input) on modules RM420-111,
RM420-123 and RM420-222
-
GPI (general purpose input) on module RM420-122
-
ACI (analog control input) on module RM420-122
-
Galvanic Isolation
-
Shielding
- 5.4. Colour Coding for Standard Network Cables
- 5.5. Specifications for MADI Modules
- 5.6. Spezifikationen für MADI Module
- 6. Power Supply
-
- 6.1. Power Supply Redundancy Options
- 6.2. Power Supply FAQs
- 6.3. Power Consumption
-
-
Power Consumption Control Modules
-
Power Consumption DSP Frame Modules
- 7. Connecting Control Modules
-
- 7.1. Cabling and Pin Assignments
-
-
Very Large Console Power Supply
-
RM420-701 1m CAN bus and 24V power cable
-
RM420-711 1,5m CAN bus and 24V power cable
-
RM420-713 2m T - CAN bus and 24V power cable
-
RM420-714 2,5m T - CAN bus and 24V power cable
-
XLR Connector
- 7.2. Wiring Examples
-
-
Control Desk and DSP Frame 3U/19“
-
Control Desk and Overbridge Modules
-
DSP Frame, Studio Panel, Control Desk and Overbridge
Modules
- 8. How To Run RM4200D Systems in a Network
-
- 8.1. Overview
- 8.2. Initial Setup
-
-
Protocols Used
- 8.3. Running a RM4200D in a Heterogenous Network
-
-
Things To Do and Not To Do
-
Getting into the RM4200D Network
- 9. Das RM4200D in ein Netzwerk integrieren
-
- 9.1. Überblick
- 9.2. Allgemeine Einstellungen
-
-
Verwendete Protokolle
- 9.3. Ein RM4200D in einem heterogenen Netzwerk betreiben
-
-
Empfohlene Netzwerkumgebung
-
Arbeiten mit dem RM4200D Netzwerk
- 10. License Codes
-
- 10.1. Licensing an RM4200D
- 11. Lizenzcodes
-
- 11.1. Lizensieren eines RM4200D
-
Index
|