| Digital reference level | 0 dBFS = full scale modulation |
| Frequency range for measurement | 20 Hz ... 20 kHz |
| Supported standards | AES3/EBU, S/PDIF (software configurable) |
| Internal sample rate converters (SRC) | yes |
| SRC input sampling frequency range | 30 kHz ... 100 kHz |
| SRC passband ripple | < 0.02 dB |
| Input impedance | 110 ohm (AES/EBU), 75 ohm (S/PDIF) |
| Dynamic range (24 bit mode) | >120 dB |
| THD+N (24 bit mode) | < -120 dB (-1 dBFS input level) / < 0.0001% |
| Max. input jitter | > 40 ns |
| Supported standards | AES3/EBU, S/PDIF |
| output impedance | 110 ohm (AES/EBU), 75 ohm (S/PDIF) |
| Dynamic range | 144 dB |
| Jitter (internal synchronisation source) | < 2 ns (peak) |
| Max. input jitter | > 40 ns |
| 4GPIs: non-insulated TTL-Inputs with internal pull up resistor (10k ohms to 5 V) | Switch to ground or TTL level (low active), overvoltage protected |
| 4 GPOs: open collector drivers, switches to ground (electronic relay, insulated) | max. 0.2 A / 24 V DC, not protected |