49 pushbuttons, 2 volume controls
1 rotary optical encoder
16-character ASCII LED display
CAN bus, RS232
160mm x 399mm x 72mm
front panel colour RAL 7024 (graphite grey)
for monitor selection, talk back etc.
table-top device
24 pushbuttons, 3 volume controls, 1 rotary optical encoder
CAN bus interface on SubD-15
300mm x 225mm x 62mm
front panel colour RAL 7024 (graphite grey), cabinet colour RAL 7035 (light grey)
57 pushbuttons, 4 volume controls
12 rotary encoders, 1 optical enc.
20 4-character ASCII LED displays
160mm x 399mmm x 72mm
24 pushbuttons
2 volume controls
chip card reader
2 chip cards 128kBit included
Cabinet not included! Please order RM330-03n-T or RM330-03n-O.
No chip card reader!
73 pushbuttons, 4 volume controls
20 rotary encoders
1 optical rotary encoder
27 4-character ASCII LED displays
480mm x 206mm x 72mm
Table-installation frame not included! Please order RM420-033-B.
4 fader channels, each with:
5 pushbuttons
4-character ASCII LED display
100mm P&G fader
expansion conn. for RM420-023/028
100mm motorized P&G fader
touch sensitive knob, silver col.
CAN bus, RS232, RM420-023/028 conn.
4 channels, each with:
4 pushbuttons
2 rotary encoders
2 4-character LED displays
ON and READY LED displays
panorama/balance LED array
for RM420-020 / RM420-029 extension
The RM420-023 is identical with the RM330-023 and is labelled „RM330-023“ on the front panel!
for monitoring selection, routing and other control functions
CAN bus on SubD-15 connectors
8 potentiometers for monitor mix, Aux send level and other control functions
2 pushbuttons
4 rotary encoders
4 four-character LED displays
11 pushbuttons
8-character ASCII LED display
1 rotary control, 4-char. display
100mm P&G faderwith PFL Backpress
1 rotary control, 4-char. displays
