This book contains the manual for installation and configuration of external modules for the RM4200D Digital Mixing and Routing System.
![[Tip]](../pics/tip.gif) | Tip |
|---|---|
This book does not contain the instructions for the configuration software Toolbox4. You find them in Part 3 of this manual, “Toolbox4 Configuration and Reference.” | |
While permanently developing the RM4200D Digital Mixing and Routing System, DHD has published several modules, which need to be treated separately regarding their special functionality. All the modules described in this manual were developed to increase the range of features of the RM4200D. The modules are mostly stand-alone devices connected directly or networked to one or more RM4200D systems. To make their functionality available in an existing RM4200D installation, additional software applications are needed. This manual shows, how to install external modules and to configure them using corresponding applications.
The following modules are described in this book:
The RM420-015 TFT Display. This module can be used to enhance an RM4200D Mixing console. With its 8,4 inch colored touch screen display, it gives a direct feedback of the settings a mixing operator applies to a channel. Additionally, it comes with 5 stereo level indicators, which can be connected to any available internal audio signal of the connected RM4200D.
Last update of this manual: September, 26th, 2006.