Tools and Spare Parts

Tools and Spare Parts
Prev	Chapter 4. List of Accessories, Mechanical Parts and Cables	Next

RM420-771 Tool kit RM4200D

Figure 118: RM420-771

4 screw drivers
cap and LED/lamp remove tools
2 small and 2 large push button caps
2 fuses 6,3A slow blow
6 screws
included in RM420-061, RM420-062, RM420-063 and RM420-064

CHIPCARD32KBYTE Chipcard for RM4200D

Figure 119: CHIPCARD32KBYTE

I2C EEPROM 32kByte (256kbit)
Chip AT24C256
85,7mm x 54mm x 0,81mm ISO Format
stores one single mixer setup

SW95CAP12MM 12mm lens, flat

Figure 120: SW95CAP12MM

for small push buttons
transparent
EAO series 95 part no. 95-703.720

SW95CAP19MM 19mm lens, concave

Figure 121: SW95CAP19MM

for large push buttons
transparent
EAO series 95 part no. 95-704.740

SW95CAPTOOL Lens remover

Figure 122: SW95CAPTOOL

Druckhaubenzieher
for small and large push buttons
EAO series 95 part no. 95-900.005

SW95DIF12MMWS Diffuser 12mm, WHITE (standard)

Figure 123: SW95DIF12MMWS

for small push buttons
EAO series 95 part no. 95-803.920

SW95DIF19MMWS Diffuser 19mm, WHITE (standard)

Figure 124: SW95DIF19MMWS

for large push buttons
EAO series 95 part no. 95-804.920

SW95DIF12MMRD Diffuser 12mm, RED

Figure 125: SW95DIF12MMRD

for small push buttons
EAO series 95 part no. 95-803.220

SW95DIF12MMYE Diffuser 12mm, YELLOW

Figure 126: SW95DIF12MMYE

for small push buttons
EAO series 95 part no. 95-803.420

SW95DIF19MMRD Diffuser 19mm, RED

Figure 127: SW95DIF19MMRD

for large push buttons
EAO series 95 part no. 95-804.220

SW95DIF19MMYE Diffuser 19mm, YELLOW

Figure 128: SW95DIF19MMYE

for large push buttons
EAO series 95 part no. 95-804.420

SW95DIF19MMGN Diffuser 19mm, GREEN

Figure 129: SW95DIF19MMGN

for large push buttons
EAO series 95 part no. 95-804.520

FADER100MM10KPG Fader 100mm 10kOhm lin P&G

Figure 130: FADER100MM10KPG

Penny & Giles PGF8110/D/M/---/A
for RM330-020, RM420-020, RM420-029

FADER100MM10KSW Fader 100mm 10kOhm lin P&G, PFL

Figure 131: FADER100MM10KSW

Penny & Giles PGF8110/D/M/O--/A
PFL backpress switch
for RM420-029B

FADER100MM10KMO Motorfader 100mm 10k lin P&G

Figure 132: FADER100MM10KMO

Penny & Giles PGFM8100/D/M/---/F
for RM420-020M, RM420-029M

FADERKNOB-BC11 BLACK 11mm width for P&G fader

Figure 133: FADERKNOB-BC11

FADERKNOB-BL11 BLUE 11mm width for P&G fader

Figure 134: FADERKNOB-BL11

FADERKNOB-GN11 GREEN 11mm width for P&G fader

Figure 135: FADERKNOB-GN11

FADERKNOB-GR11 GREY 11mm width for P&G fader

Figure 136: FADERKNOB-GR11

FADERKNOB-RD11 RED 11mm width for P&G fader

Figure 137: FADERKNOB-RD11

FADERKNOB-WH11 WHITE 11mm width for P&G fader

Figure 138: FADERKNOB-WH11

FADERKNOB-YE11 YELLOW 11mm width for P&G fader

Figure 139: FADERKNOB-YE11

FADERKNOB-BC16 BLACK 16mm width for P&G fader

Figure 140: FADERKNOB-BC16

FADERKNOB-BL16 BLUE 16mm width for P&G fader

Figure 141: FADERKNOB-BL16

FADERKNOB-GN16 GREEN 16mm width for P&G fader

Figure 142: FADERKNOB-GN16

FADERKNOB-GR16 GREY 16mm width for P&G fader

Figure 143: FADERKNOB-GR16

FADERKNOB-RD16 RED 16mm width for P&G fader

Figure 144: FADERKNOB-RD16

FADERKNOB-WH16 WHITE 16mm width for P&G fader

Figure 145: FADERKNOB-WH16

FADERKNOB-YE16 YELLOW 16mm width for P&G fader

Figure 146: FADERKNOB-YE16

LED-24V-GREEN T1-3/4 24V LED lamps

Figure 147: LED-24V-GREEN

for RM420-020, RM330-020 push buttons below faders
EAO series 51 part no. 10-2312.1065

LED-24V-RED T1-3/4 24V LED lamps

Figure 148: LED-24V-RED

for RM420-020, RM330-020 push buttons below faders
EAO series 51

LED-24V-YELLOW T1-3/4 24V LED lamps

Figure 149: LED-24V-YELLOW

for RM420-020, RM330-020 push buttons below faders
EAO series 51

SWLAMP51-28V bulb T1-3/4 28V 1,12W

Figure 150: SWLAMP51-28V

for RM420-020, RM330-020 push buttons below faders
EAO series 51
LED lamps also available!

SW51CAP-CL push button cap series 51 CLEAR

Figure 151: SW51CAP-CL

for RM420-020, RM330-020 push buttons below faders
EAO series 51 part no. 51-903.7
cap and diffusor

SW51CAP-GN push button cap series 51 GREEN

Figure 152: SW51CAP-GN

for RM420-020, RM330-020 push buttons below faders
EAO series 51 part no. 51-903.5
cap and diffusor

SW51CAP-RD push button cap series 51 RED

Figure 153: SW51CAP-RD

for RM420-020, RM330-020 push buttons below faders
EAO series 51 part no. 51-903.2
cap and diffusor

SW51CAP-YE push button cap series 51 YELLOW

Figure 154: SW51CAP-YE

for RM420-020, RM330-020 push buttons below faders
EAO series 51 part no. 51-903.4
cap and diffusor

SW51LAMPTOOL lamp removing tool series 51

Figure 155: SW51LAMPTOOL

Lampenzieher Serie 51

SW51-1S30X24PB push button EAO series 51

Figure 156: SW51-S30X24PB

for RM420-020, RM330-020 push buttons below faders
EAO series 51 part no. 51-425.036

MSHALSM2.5X11SW BLACK screw for console modules

Figure 157: MSHALSM2.5X11SW

Halsschraube schwarz M2,5x11
neck collar screw

MSISO7380M3X6SW BLACK screw for faders

Figure 158: MSISO7380M3X6SW

Linsenschraube M3x6 schwarz zur Fadermontage

RPKNOB-10MM4MM knob for ALPS encoder 10mm BLACK

Figure 159: RPKNOB-10MM4MM

for RM420-012/014/018/023/027/028
for RM420-029/078, RM330-012/023
without cap
OKW part no. A2510040

RPKNOB-CAP10BC cap for encoder knob 10mm BLACK

Figure 160: RPKNOB-CAP10BC

for RM420-012/014/018/023/027/028
for RM420-029/078, RM330-012/023
without line
OKW part no. A4110000

RPKNOB-CAP10BL cap for encoder knob 10mm BLUE

Figure 161: RPKNOB-CAP10BL

without line
OKW part no. A4110006

RPKNOB-CAP10GN cap for encoder knob 10mm GREEN

Figure 162: RPKNOB-CAP10GN

without line
OKW part no. A4110005

RPKNOB-CAP10GR cap for encoder knob 10mm GREY

Figure 163: RPKNOB-CAP10GR

without line
OKW part no. A4110007

RPKNOB-CAP10RD cap for encoder knob 10mm RED

Figure 164: RPKNOB-CAP10RD

without line
OKW part no. A4110002

RPKNOB-CAP10YE cap for encoder knob 10mm YELLOW

Figure 165: RPKNOB-CAP10YE

without line
OKW part no. A4110004

RPKNOB-15MMBC knob for optical encoder BLACK

Figure 166: RPKNOB-15MMBC

for RM420-010/011/012/014
without line
without cap
Sibalco part no.0160/S 150 250 black

RPKNOB-CAP15BC cap for encoder knob 15mm BLACK

Figure 167: RPKNOB-CAP15BC

for RM420-010/011/012/014
without line
Sibalco part no. 0160/C 150 black

RPKNOB-15MMBCL knob for potentiometer BLACK

Figure 168: RPKNOB-15MMBCL

for RM420-010/011/012/013/014/027
with white line
without cap
Sibalco part no.0160/DC151 006 black

RPKNOB-CAP15BCL cap for pot. knob 15mm BLACK

Figure 169: RPKNOB-CAP15BCL

for RM420-010/011/012/013/014/027
with white line
Sibalco part no. 0160/C 151 black

RPKNOB-CAP15RDL cap for pot. knob 15mm RED

Figure 170: RPKNOB-CAP15RDL

with white line
Sibalco part no. 0160/C 151 red

RPKNOB-11MMBCL knob for potentiometer BLACK

Figure 171: RPKNOB-11MMBCL

for RM420-026
with white line
without cap
Sibalco part no.0160/DR111 006 black

RPKNOB-CAP11BCL cap for pot. knob 11mm BLACK

Figure 172: RPKNOB-CAP11BCL

for RM420-026
with white line
Sibalco part no. 0160/C 111 black

RP10K-RK11K114 Potentiometer for level control

Figure 173: RP10K-RK11K114

RM420-010/011/012/013/014/026
RM330-012, RM330-013
for PCB mounting

SWIGALPSEC11B15 Encoder ALPS 4mm axis

Figure 174: SWIGALPSEC11B15

RM420-012, RM420-014, RM420-029
RM420-018, RM420-027, RM420-078
RM330-012, RM330-013
for PCB mounting

Z420-845 Mains Power Inlet Module

Figure 175: Z420-845

spare part, included in each DSP Frame or Power Supply Frame
note different jumper settings when using in a DSP Frame (master) or in a Console Power Supply Frame RM420-081, RM420-086 (slave)
CAN bus connectors RJ45 and XLR-4

RM420-082 Power Supply 24V/75W

Figure 176: RM420-082

suitable for redundant operation
current share operation
range: 200V to 250V AC
necessary for operation of console
Old model, only available as spare part.

more information

RM420-085 Power Supply 5V/75W

Figure 177: RM420-085

suitable for redundant operation
current share operation
range: 200V to 250V AC
necessary for operation of DSP Frame modules
Old model, only available as spare part.

more information

Z420-814 Front Panel for empty slots, 4TE

Figure 178: Z420-814

20.32mm, 3U

Z420-818 Front Panel for empty slots, 8TE

Figure 179: Z420-818

40.64mm, 3U